How to Design a Theme Color Palette
- Choose the Number of colors for your theme (1 to 8), start with black or enter a starting color, and press Start new palette.
- Select a color in your palette and adjust it with the Red, Green and Blue sliders, the hex field, the color picker or the color wheel.
- Review the complementary, split complementary, analogous, triadic, tetradic, square and monochromatic colors. Press Use these colors to fill your palette with a harmony, or tap any swatch to use it for the selected color.
- Use the shades, tints, tones and 50-950 scale to find lighter and darker variations, and check the contrast ratio and the theme preview.
- Copy any HEX or RGB value, or export the whole palette as CSS variables, SCSS or JSON.
Color Theory Basics
Color theory describes how colors relate to each other on the color wheel. Each color has a hue (its position on the wheel, from 0 to 360 degrees), a saturation (how vivid it is) and a lightness (how close it is to black or white). Color harmonies are combinations at fixed angles on the wheel that reliably look good together.
| Harmony | Angles on the wheel | Best for |
|---|---|---|
| Complementary | 0° and 180° | Maximum contrast; buttons and calls to action |
| Split complementary | 0°, 150° and 210° | Strong contrast that is easier to balance |
| Analogous | 0°, 30° and −30° | Calm, unified themes and backgrounds |
| Triadic | 0°, 120° and 240° | Vibrant, balanced, playful palettes |
| Tetradic (rectangle) | 0°, 60°, 180° and 240° | Rich palettes with two complementary pairs |
| Square | 0°, 90°, 180° and 270° | Bold, colorful designs with one dominant color |
| Monochromatic | One hue, different lightness | Clean, cohesive interfaces |
Shades, tints and tones change a color without changing its hue: a shade mixes in black, a tint mixes in white and a tone mixes in gray. They are how one brand color becomes a full set of hover states, borders, backgrounds and text colors.
Tips for Choosing Theme Colors
- Follow the 60-30-10 rule. Use a neutral or background color for about 60% of the design, a secondary color for 30% and an accent color for the remaining 10%.
- Start with one brand color. Pick your primary color first, then let a harmony suggest the secondary and accent colors.
- Check contrast early. Body text needs a contrast ratio of at least 4.5:1 with its background to meet WCAG AA.
- Use the 50–950 scale. Light steps (50–200) make good backgrounds, middle steps (400–600) make buttons, and dark steps (700–950) make text and borders.
- Limit the palette. Most websites and apps need three to five colors plus their shades and tints.
Frequently Asked Questions
What are complementary colors?
Complementary colors sit directly opposite each other on the color wheel, 180 degrees apart, such as blue and orange. They create the strongest contrast of any color pair, which makes them ideal for buttons, calls to action and anything that must stand out. Use one as the main color and the other sparingly as an accent.
What are analogous colors?
Analogous colors sit next to each other on the color wheel, usually 30 degrees apart, such as blue, blue-green and green. They look calm and harmonious because they share undertones, and they work well for backgrounds, illustrations and themes that should feel unified.
What is the difference between triadic and tetradic colors?
A triadic scheme uses three colors evenly spaced 120 degrees apart, forming a triangle on the color wheel, and gives a vibrant but balanced palette. A tetradic (rectangle) scheme uses four colors made of two complementary pairs, at 0, 60, 180 and 240 degrees. A square scheme is a tetradic scheme with the four colors 90 degrees apart. Four-color schemes are rich, so let one color dominate.
What is a split complementary color scheme?
A split complementary scheme uses the base color plus the two colors on either side of its complement, 150 and 210 degrees around the color wheel. It keeps much of the contrast of a complementary pair but is easier to balance, which makes it a good choice for beginners.
What are monochromatic colors?
A monochromatic palette uses a single hue in different lightness and saturation levels, such as navy, blue and light blue. It always looks cohesive and is easy to apply to an interface, from dark text to light backgrounds.
What is the difference between a shade, a tint and a tone?
A shade is a color mixed with black, which makes it darker. A tint is a color mixed with white, which makes it lighter. A tone is a color mixed with gray, which makes it softer and less saturated. The Theme Color Designer shows each in 10% steps, plus a 50 to 950 scale like the ones used by design systems and CSS frameworks.
How do I choose accessible theme colors?
Check the contrast ratio between text and its background. The WCAG 2 guidelines require at least 4.5:1 for normal text (AA), 3:1 for large text, and 7:1 for the stricter AAA level. The designer shows the contrast ratio of every selected color with white and black text and labels it AAA, AA, AA Large or Fail.
Which color wheel does this tool use?
It uses the RGB color wheel built on the HSL (hue, saturation, lightness) model, the same wheel used by CSS and most digital design tools. Harmonies are calculated by rotating the hue of the selected color while keeping its saturation and lightness, so the results are exact screen colors you can use in websites and apps.
Why are all the generated colors black or gray?
Black, white and grays have no hue, so rotating them around the color wheel gives the same color. Raise the Red, Green or Blue slider, enter a hex code, or click the color wheel to add color, and the harmonies update immediately.
Does it work on iPhone, iPad and Safari?
Yes. The Theme Color Designer works in Safari on Mac, iPhone and iPad as well as Chrome, Edge, Firefox and Samsung Internet. There is nothing to install and no sign-up. Your palette is remembered in your browser, and you can copy a share link to open it on another device.